Erico SBG150 Rail Grinder Manuel d'utilisateur télécharger pdf (Page 6)

www.erico.com

FUEL MIX

DANGER

EXPLOSION, FLAMMABILITY HAZARD: Failure to refuel the equipment away from open flame, spark generators, or other

ignition sources, including smoking, will result in a fatal or serious injury accident. Never start the engine in an explosive atmosphere

or near flammables. Failure to observe this can be fatal or result in serious injury.

CAUTION

Select safe area for fueling. DO NOT SMOKE or bring any flame or sparks near fuel. Move at least 10 feet (3 m) from the fueling

spot before starting the engine.

This tool is designed to operate on unleaded gasoline with a mix ratio of 50:1. A name-brand gasoline is recommended with a

quality 2-stroke engine oil having a classification type TC.

The unleaded gasoline requires a minimum octane number 89 (90 ROZ). Fuels with a lower octane level may result in premature

engine failure and may void the warranty.

The chemical composition of the fuel is also important. Various additives etc. may affect seals, fuel lines, diaphragms and metal cast

materials. Therefore it is essential that only name brand fuels be used.

RECOMMENDED ENGINE OIL: We recommend the use of any name brand type TC two-stroke engine oil.

NOTICE

DO NOT use types BIA or TCW (2-stroke water-cooled) engine oils.

When preparing to mix fuel, first pour the two-stroke engine oil in fuel container and then add gasoline.

Gasoline 2-stroke Oil (type TC)

(US Gal.) (US fl. Oz.)

1.0 2.6

2.5 6.4

5.0 12.8

WARNING

EXPLOSION FLAMMABILITY HAZARD: Failure to remove fuel cap slowly to release pressure and/or re-install fuel cap properly

may cause spurting of gasoline onto hot parts of engine and possible fire resulting in serious or fatal burns.

1. Ensure area around fuel cap is free of dirt. Loosen fuel cap slowly.

2. Thoroughly shake fuel canister to ensure gasoline is mixed with engine oil. Add fuel to reservoir and avoid spillage by not

overfilling.

3. Immediately replace fuel cap and hand tighten. Additionally, use a suitable tool (screwdriver, etc.) to tighten the slotted fuel

cap. Wipe up any fuel spillage.

AGING OF FUEL MIX: Mix enough fuel for several days of work, DO NOT store mixed fuel for more than 30 days. Use only

approved safety fuel-containers for storage.

For long-term storage of the tool, drain and clean the fuel tank and run the engine to ensure that no fuel is in the carburetor. Store

the tool in the toolbox provided. Ensure the storage area is secure and not accessible to children or other unauthorized persons.

Replacement of the fuel pickup body (fuel filter) that is located in the fuel reservoir is recommended once every year.

DRIVE BELT LUBRICANT: Lubrication of the drive belt is not required. The oil pump has been disengaged and the oil reservoir

cap has been riveted in place to eliminate the potential of adding oil to the reservoir.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Pas de commentaire

Erico SBG150 Rail Grinder Manuel d'utilisateur Page 6